Bertazzoni A304GGVXE/02 Benutzerhandbuch

 

18

Loosen and the screw V and pull out the burner 
from the support being careful not to damage the 
ignition plug and the thermocouple  

Unscrew the nozzle R using  a 7 mm. spanner and 
replace it with the nozzle for the new type of gas      
according to what is indicate in the table below  
ATTENTION: pay extra attention to avoid damage 
to the igniter and thermocouple. 

 

 Re‐install all the parts in revers sequence       

 

 

Loosen the screw and pull out the burner from 
the support being careful not to damage the 
ignition plug and the thermocouple. 
 

 

Using a 7 mm [name of the tool] unscrew the 
nozzle. Replace the nozzle using the conversion 
set supplied with the range or by a Bertazzoni 
authorized parts warehouse. Each nozzle has a 
number indicating its flow diameter printed on 
the body. Consult the table on page 20 for 
matching nozzles to burners. 

 

Adjust the gap X by setting it to fully open 
position.