Kenwood IH100 Benutzerhandbuch
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
7
troubleshooting guide
problems
suggestions
After the appliance is plugged in
• Check that the plug is inserted correctly
and the power button is pressed,
and that the power is switched on.
no indicators are lit
• Where fitted check the plug fuse.
The power button indicator lights
• Check that pan is present
up, but heating does not start
• Check suitability of the pan
when power control is adjusted
• Check that pan is centrally located
Heating stops suddenly
• Check power supply to the appliance
during operation
• Check the air entry or the air vent is
not blocked
• Check the timing period has not ended
• Check the appliance has not overheated
• Check the appliance has not overheated
or entered error mode – unplug, allow to
cool and try again later
cool and try again later
In timer mode, the timer is set and
• Increase the power with the power
the on/off button is flashing but
control
heating does not begin.
Failure codes occur:
• Appliance may have overheated/boiled
E:03 E:06
dry. Unplug the appliance, allow to cool
and try again later
E:07 E:08
• Fluctuation in mains supply. Unplug the
appliance, allow to cool and try again
later
later
E:01 E:02 E:04 E:05 E:0b E:0C
• Send it to a service facility for repair