Kenwood IH100 Manual Do Utilizador

7

troubleshooting guide

After the appliance is plugged in

• Check that the plug is inserted correctly 

and the power button is pressed,

and that the power is switched on.

no indicators are lit

• Where fitted check the plug fuse.

The power button indicator lights

• Check that pan is present

up, but heating does not start 

• Check suitability of the pan

when power control is adjusted

• Check that pan is centrally located

Heating stops suddenly

• Check power supply to the appliance

during operation

• Check the air entry or the air vent is 

not blocked

• Check the timing period has not ended
• Check the appliance has not overheated

or entered error mode – unplug, allow to
cool and try again later

In timer mode, the timer is set and

• Increase the power with the power 

the on/off button is flashing but

control

heating does not begin.

Failure codes occur:

• Appliance may have overheated/boiled 

E:03 E:06 

dry. Unplug the appliance, allow to cool 

and try again later

E:07 E:08

• Fluctuation in mains supply. Unplug the 

appliance, allow to cool and try again 
later

E:01 E:02 E:04 E:05 E:0b E:0C

• Send it to a service facility for repair