Whirlpool RF350BXG Benutzerhandbuch
10
OVEN USE
Electronic Oven Control
Display
After installing the appliance according to the Installation
Instructions and connecting the power supply, “PF” will appear
on the display. Press OFF/CANCEL to clear “PF”.
Instructions and connecting the power supply, “PF” will appear
on the display. Press OFF/CANCEL to clear “PF”.
If “PF” appears again, a power failure has occurred. Press OFF/
CANCEL to clear display.
CANCEL to clear display.
■
When using the oven, the display shows preheat time and
temperature setting.
temperature setting.
■
The ON light will come on when the oven is on.
■
When not using the oven, the display is blank.
Indicator Lights
The BAKE, BROIL and CLEAN indicator lights will come on when
that setting is selected. For example, when the BAKE pad is
pressed and during the bake cycle the BAKE indicator light will
come on.
that setting is selected. For example, when the BAKE pad is
pressed and during the bake cycle the BAKE indicator light will
come on.
The HEAT indicator light will come on and go off periodically as
the oven elements cycle during baking, broiling or self-cleaning.
the oven elements cycle during baking, broiling or self-cleaning.
The DOOR LOCKED indicator light will come on when the oven
door is locked.
door is locked.
Start/Enter and Off/Cancel
START/ENTER begins any function. If START/ENTER is not
pressed within 5 seconds, the “START?” indicator light will flash.
If START/ENTER is not pressed within 5 minutes, the function will
be canceled.
pressed within 5 seconds, the “START?” indicator light will flash.
If START/ENTER is not pressed within 5 minutes, the function will
be canceled.
OFF/CANCEL stops any function except for the Control Lock.
Control Lock
The Control Lock shuts down the control panel to prevent
unintended use of the oven. Do not use when the oven is in use
or a control has been set.
unintended use of the oven. Do not use when the oven is in use
or a control has been set.
To Lock Control:
Press and hold START/ENTER for 5 seconds.
A tone will sound. “Loc” will appear on the display and the
START? indicator light will come on. Both will go off in 5 seconds.
START? indicator light will come on. Both will go off in 5 seconds.
When the control is locked and any pad is pressed, “Loc” will
appear on the display and the START? indicator light will come
on. Both will go off in 5 seconds.
appear on the display and the START? indicator light will come
on. Both will go off in 5 seconds.
To Unlock Control:
Press and hold START/ENTER for 5 seconds.
During those 5 seconds “Loc” will appear on the display and the
START? indicator light will come on. A tone will sound, then both
will go off.
START? indicator light will come on. A tone will sound, then both
will go off.
1.
Indicator Lights
2.
Display
3.
Oven Selectors
4.
Temperature
5.
Start/Enter
6.
Off/Cancel
2
6
5
4
1
3