DCS 30 inch Benutzerhandbuch
27” & 24” OVEN SELF-CLEANING
Wipe off any smoke residue that remains on the front
frame with Formula 409® and Fantastik®. If stain
remains, use a mild liquid cleanser. The amount of
smoke stain is directly related to the amount of food
soil left in the oven at the time of self-cleaning.
Clean the oven often.
frame with Formula 409® and Fantastik®. If stain
remains, use a mild liquid cleanser. The amount of
smoke stain is directly related to the amount of food
soil left in the oven at the time of self-cleaning.
Clean the oven often.
When the clean cycle starts, the lock light turns on,
and the automatic door lock cycle begins. Do Not
attempt to open the door when the lock light is on.
You can stop the cycle by pushing the off button.
The lock light will turn off only after the oven has
cooled below 550ºF, and the automatic door lock has
completed its cycle to the open position.
and the automatic door lock cycle begins. Do Not
attempt to open the door when the lock light is on.
You can stop the cycle by pushing the off button.
The lock light will turn off only after the oven has
cooled below 550ºF, and the automatic door lock has
completed its cycle to the open position.
Remove all utensils.
Clean the oven front frame and
outer door edges. Wipe up large
spillovers and grease. (see below)
spillovers and grease. (see below)
Be sure the light bulbs and glass
covers are in place.
(see page 6- item #26)
covers are in place.
(see page 6- item #26)
Turn on the ventilator hood
above the range and leave it on
until after the oven has completed
the self-clean cycle.
until after the oven has completed
the self-clean cycle.
Remove Oven Racks and Rack
Slide Assemblies
(NOTE: An Interlock System has been
designed so that the Self-Clean
Cycle will not engage until the
Rack Slide Assemblies have been
removed. The roller assisted rack
supports are designed to withstand the
temperature range of the standard
baking thermostat. They will not
withstand the extreme temperatures of
pyrolytic self cleaning. To remove the
Assemblies; A) For each side,
Remove the retaining screw, B) Lift
up slightly and pull the entire
Assembly out. Set aside.)- Replace the
assemblies and retaining screws
after the Self-Clean cycle has
finished. (see illustration below)
Cycle will not engage until the
Rack Slide Assemblies have been
removed. The roller assisted rack
supports are designed to withstand the
temperature range of the standard
baking thermostat. They will not
withstand the extreme temperatures of
pyrolytic self cleaning. To remove the
Assemblies; A) For each side,
Remove the retaining screw, B) Lift
up slightly and pull the entire
Assembly out. Set aside.)- Replace the
assemblies and retaining screws
after the Self-Clean cycle has
finished. (see illustration below)
Wipe out puddles of grease and any loose soil that
can be easily removed.
Remove any soil that is outside the door seal area.
This appliance is designed to clean the oven interior
and that portion of the door that is inside the oven.
The outer edges of the door and the oven cavity are
not in the cleaning zone. Wipe this area clean
BEFORE SETTING THE OVEN TO SELF-
CLEAN.
can be easily removed.
Remove any soil that is outside the door seal area.
This appliance is designed to clean the oven interior
and that portion of the door that is inside the oven.
The outer edges of the door and the oven cavity are
not in the cleaning zone. Wipe this area clean
BEFORE SETTING THE OVEN TO SELF-
CLEAN.
27” OVEN RACK SLIDE ASSEMBLY:
BEFORE SELF-CLEANING THE OVEN:
OVEN DOOR LOCK DURING SELF-CLEAN
22