Lowrance electronic LMF-200 Benutzerhandbuch

40 

  

1. Make sure the Fuel Remaining Source has been set to Fluid Level. 

Press 

, select 

 and press 

.  

2. Highlight 

 (Fuel Manager) and press 

. Select 

 

(Fuel Remaining Source) and press 

. Highlight 

 and 

press 

. You will be taken back to the main display. Now we are 

ready to configure the sensor. 
3. Press 

, select 

 and press 

. Highlight 

and press 

. 

4. Select an unconfigured fluid level from the bus devices list and press 

. The fluid level menu will appear.  

5. Highlight

 from the list of fluid types and press 

. If your 

engine-tank configuration is set for multiple tanks, a menu will appear 

with up to three options: Port Tank, Cen (Center) Tank and

Stbd 

(Starboard) Tank. 
6. Highlight one of the three tank options and press 

. You will be 

taken back to the Bus Devices list, where your newly configured Fluid 

Level will be listed as: F. Tnk (P), F. Tnk (C) or F. Tnk (S), depending 

on the tank location you chose. If you have one tank, it will be shown as 

F. Tnk. 

1. Press 

, select 

 and press 

. Highlight 

 

and press 

. 

2. Select the desired unconfigured fluid level (Unfcg FL

)

 from the Bus 

Devices list and press 

, which will launch the following message: 

Hit Menu to Cfg FLev Sns. 
3. Press 

, select 

from the list of fluid types and press 

. The Tank Number window will appear. 

4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you 

are configuring and press 

. That will launch the Tank Size 

window.  
5. Input the capacity of the tank (gallons) and press 

. You will be 

directed to the Bus Devices list, where the fluid level you configured 

will be displayed as FrW Tnk1, FrW Tnk2 or FrW Tnk3, depending on 

the tank number you assigned it. 

1. Press 

, select 

 and press 

. Highlight 

 

and press 

.