Lowrance electronic LMF-200 Benutzerhandbuch

Seite von 72
41 
2. Select the desired unconfigured fluid level (Unfcg FL
)
 from the Bus 
Devices list and press 
MENU
, which will launch the following message: 
Hit Menu to Cfg FLev Sns. 
3. Press 
MENU
, select 
W
ASTE 
W
 
from the list of fluid types and press 
MENU
. The Tank Number window will appear. 
 
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you 
are configuring and press 
MENU
. That will launch the Tank Size 
window.  
5. Input the capacity of the tank (gallons) and press 
MENU
. You will be 
directed to the Bus Devices list, where the fluid level you configured 
will be displayed as WtW Tnk1, WtW Tnk2 or WtW Tnk3, depending 
on the tank number you assigned it. 
To configure EP-15 Fluid Level for Oil:
  
1. Press 
MENU
, select 
S
YSTEM 
S
ETUP
 and press 
MENU
. Highlight 
B.
 
D
EVICES
 
and press 
MENU
2. Select the desired unconfigured fluid level (Unfcg FL
)
 from the Bus 
Devices list and press 
MENU
, which will launch the following message: 
Hit Menu to Cfg FLev Sns. 
3. Press 
MENU
, select 
O
IL 
from the list of fluid types and press 
MENU
That will launch the Tank Size window.  
4. Input the capacity of the tank (gallons) and press 
MENU
. You will be 
directed to the Bus Devices list, where the fluid level you configured 
will be displayed as O. Tnk (P), O. Tnk(C) or O Tnk (S), depending the 
tank location you chose. 
To configure EP-15 Fluid Level for Black Water:
  
1. Press 
MENU
, select 
S
YSTEM 
S
ETUP
 and press 
MENU
. Highlight 
B.
 
D
EVICES
 
and press 
MENU
2. Select the desired unconfigured fluid level (Unfcg FL
)
 from the Bus 
Devices list and press 
MENU
, which will launch the following message: 
Hit Menu to Cfg FLev Sns. 
3. Press 
MENU
, select 
B
LACK 
W
 
from the list of fluid types and press 
MENU
. The Tank Number window will appear. 
 
4. Assign a tank number (1, 2 or 3) to the tank using the fluid level you 
are configuring and press 
MENU
. That will launch the Tank Size 
window.  
5. Input the capacity of the tank (gallons) and press 
MENU
. You will be 
directed to the Bus Devices list, where the fluid level you configured 
will be displayed BlkW Tnk1, BlkW Tnk2 or BlkW Tnk3, depending on 
the tank number you assigned it.