Lowrance electronic HDS 8 Benutzerhandbuch

If you plan to route the transducer cable through the transom, you will need either a 1” drill 

bit or a 5/8” drill bit depending on the size of the transducer cable connector. Each transom 

mount requires a high quality, marine grade above- or below-waterline sealant/adhesive 

compound. The following installations also call for these recommended tools and supplies.

 two adjustable wrenches or socket wrench, drill, #29 (0.136”) drill bit, screwdriver. 

Supplies: none.

 two adjustable wrenches or socket wrench, drill, #20 (0.161”) drill bit, screwdriver. 

Supplies: four, 1” long, #12 stainless steel wood screws.

 two adjustable wrenches or socket wrench, screwdriver. Supplies: plastic cable ties.

 alcohol wipes, 60 and 160 grit sandpaper, and marine grade above- or below-

waterline epoxy adhesive.

 alcohol wipes, 60 and 160 grit sandpaper, and marine grade above- or below-

waterline epoxy adhesive.