Russound CAM6.6T-S1 Benutzerhandbuch

55

Tells the system whether a command will be issued after the 

(Sufix) 

selection of the numerical value (e.g., 1, 2 

Enter). If “no,” proce-

dure advances to SAVE CHANGES (step 13)

10. COMMAND TYPE – 

Select the type of source command (e.g., CD, TV, etc.). 

(CmdTp)

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 12)

The numeric IR Suffix command is cleared. Procedure advances 

(Unasg)

to SOURCE NUM (step 1)

Default selects the same device type and device code previously 

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 12)

(Macro)

i. MACRO - 

Macro loads a series of commands which are processed when 

(Macro)

activated.

ii. MACRO ID – 

Enter the macro ID number. Menu advances to SAVE CHANGES 

(MacID)

(step 13) 

Procedure advances to DEVICE CODE (step 11)

11. DEVICE CODE – 

Source component code for IR control.

(DevCd)

12. KEY FUNCTION – 

Select a function (Enter, Play, etc.).

(KeyFn)

13. SAVE CHANGES? – 

Select “yes” to save the changes.

(Save?)

This procedure permits a command to be sent to the source component when the source component
is initially selected. 

1. SOURCE NUM – 

Select the source number this command will be configured for.

(Src #)