Russound CAM6.6T-S1 Benutzerhandbuch

2. COMMAND TYPE – 

Select the type of source command (e.g., CD, TV, etc.). 

(CmdTp)

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 4)

The source select command is cleared. Procedure advances to 

(Unasg)

SAVE CHANGES (step 5)

Default selects the same device type and device code previously 

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 4)

(Macro)

i. MACRO - 

Macro loads a series of commands which are processed when 

(Macro)

activated.

ii. MACRO ID – 

Enter the macro ID number. Menu advances to SAVE CHANGES 

(MacID)

(step 5) 

Procedure advances to DEVICE CODE (step 3)

3. DEVICE CODE – 

Source component code for IR control.

(DevCd)

4. KEY FUNCTION – 

Select a function (Play, Enter, etc.).

(KeyFn)

5. SAVE CHANGES? – 

Select “yes” to save the changes.

(Save?)

At this field it is necessary to enter the number of sources used in the CAM6.6 system (1 to 6). This
limits the sources displayed on the keypad in the normal running mode when the source button is
pressed, but also limits source selections in the configuration menus. 

NOTE: This procedure should be performed using the keypad installed in the zone to be configured.
See Zone Setup - Flow Chart on page 70

56