Furuno B042-004 Benutzerhandbuch

3. INITIAL SETTINGS 

d)  Use [+] or [-] to set the value for the frequency which is connected, and then press [

!

] or 

[

"

] to close the dialog box. (Available range: HIGH; 40 – 220 kHz, LOW; 25 – 220 kHz) 

e)  To operate the transducer in reduced power (for example, when vessel is in dry dock), 

press [

"

] to select PWR REDUCTION, and then press [+] or [-] to open the dialog box. 

ON

f)  Press [+] or [-] to turn the power reduction ON, and then press [

!

] or [

"

] to close the 

dialog box. 

6.  Confirm settings and turn off the power. 
 

If a water temperature sensor is connected, set up as follows: 
 
1.  Turn on the power and turn the [FUNCTION] switch to the MENU position. 
2. Press [

!

] and [+] to select SYSTEM at the top of the screen. 

3. Press [

"

] to select TEMP SETTING, and then press [+] to open that menu. 

TEMP SETTING

DISP    ALM    TX/RX    E/S    

SYSTEM

Select temperature unit.

:

 ˚F 

TEMP INPUT

: SENSOR

TEMP ADJUST

: +0.00

˚F (-20   +20)

TEMP OUTPUT

: OFF

TEMP READOUT : OFF

TEMP GRAPH

: OFF

TEMP COLOR

: STD

[-/+]: Change set, [EXIT]: Exit

4.  The cursor is selecting TEMP UNIT; press [+] or [-] to open the dialog box. 

   C  

5.  Press [+] or [-] to select the temperature unit, and then press [

!

] or [

"

] to close the 

dialog box.