Weber Silver B Benutzeranleitung
B-5
Install manifold brackets
The manifold brackets(2) are already in place on the
manifold between the valves.
Place your hand underneath the manifold. Lift the
manifold and cooking box slightly and hook the
manifold bracket(2) onto the frame brace(1).
The manifold brackets(2) are already in place on the
manifold between the valves.
Place your hand underneath the manifold. Lift the
manifold and cooking box slightly and hook the
manifold bracket(2) onto the frame brace(1).
(1)
(2)
Install igniter
Note - The igniter wires are already attached to the
Gas Catcher Ignition Chamber and the igniter. This
was done to factory test the ignition system.
The igniter lock nut is on the igniter.
1) Loosen the igniter lock nut.
2) Insert the top of the igniter up through the large
Note - The igniter wires are already attached to the
Gas Catcher Ignition Chamber and the igniter. This
was done to factory test the ignition system.
The igniter lock nut is on the igniter.
1) Loosen the igniter lock nut.
2) Insert the top of the igniter up through the large
part of the keyhole in the frame brace. Slide the
igniter into the small part of the keyhole.
igniter into the small part of the keyhole.
3) Tighten the igniter lock nut back onto the igniter.
Note - If the igniter works loose, carefully tighten the
igniter lock nut with an adjustable wrench or pliers.
Note - If the igniter works loose, carefully tighten the
igniter lock nut with an adjustable wrench or pliers.
(1)
(2)
(3)