Combi 8100 Benutzerhandbuch

When not using the LATCH System, store the 
lower anchor belt and connectors by snapping 
the connectors onto LATCH connector storage 
rings located on the back side of the 
seat pad (fig. l). Pull on free end of 
lower anchor belt to tighten.

NOTE: To prevent damage to the seat 

pad, care should be taken when 
removing or securing connectors.
Excessive force could damage 
or tear seat pad.

Refer to vehicle owner’s manual to identify the 
seating locations which can be used with a car seat. 
Check for specific instructions for car seat use.

After selecting a seating location, if adjustable,
adjust vehicle seat back into most upright position.

Rotate car seat on lower base to forward-facing 
position, see “Changing Forward-Facing/
Rear-Facing Use Position” section.

Place car seat forward-facing in the vehicle seat 
location selected with forward-facing belt path
openings toward vehicle seat back (fig. a).