Monessen Hearth VFCS20DPV Benutzerhandbuch

58D6002

Flames from the pilot, front and rear burner should be visually checked as soon as the heater is installed.

In addition, periodically check the flames visually during operation.

CHECkING PILOT FLAME

The pilot flame must always be present when the heater is in operation.

It should just touch the top of the ther-

mocouple tip for natural. See Figure 17 for correct pilot flame.
If the pilot flame does not touch the thermocouple, then the burners cannot function reliably. See Figure 18 for incorrect

shape of pilot flame.
MILLI-VOLT CONTROL

Figure 17 - Correct Appearance of Pilot Flame

Figure 18 - Incorrect Appearance of Pilot Flame

Thermocouple

for Natural

Thermocouple

for LP

Thermocouple

for LP

Thermocouple

for Natural

FLAME APPEARANCE