Monessen Hearth VFCS20DPV Benutzerhandbuch

Seite von 32
58D6002
1
PIL
OT
OFF
REMO
TE C
ONTROL 
Figure 20 - Location of Piezo Ignitor, Control Knobs and Switch on Milli-volt Unit
A. 
This appliance is equipped with an ignition device which automatically lights the pilot. If the piezo is not
working properly, see Match Lighting Instructions,
 
page 24. 
B. 
BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor
because some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
 •  Do not attempt to light any appliance.
 •  Do not touch any electric switch; do not use any phone in your building.
 •  Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
 •  If you cannot reach your gas supplier, call the fire department.
C.
Use only your hand to push in, or turn the gas control knob. Never use tools. If the knob will not push in or
turn by hand, don't try to repair it. Call a qualified service technician. Force or attempted repair may result
in a fire or explosion.
D
. Do not use this appliance if any part of it has been under water. Immediately call a qualified service tech-
nician to inspect the appliance and to replace any part of the control system and any gas control that has
been under water.
OPERATING INSTRUCTIONS
 FOR YOUR SAFETY READ BEFORE LIGHTING 
Optional 
Fan 
Off/Pilot/On Knob 
Hi/Lo Knob 
Data and Instruction 
Plates Located on 
Back of Burner 
Optional 
Remote 
Receiver 
W
ARNING
If you do not follow these instruction 
exactly, a fire or explosion may result 
causing  property  damage,  personal 
injury or loss of life.