Philips DVDR5520H/05 Benutzerhandbuch

19

The progressive scan video quality is only 
available when using Y Pb Pr connection 
and a progressive scan TV is required. It 
provides superior picture quality when 
watching DVD movies.

A

 Connect the component video cables 

(red/ blue/green - not supplied) from the 
Y P

 sockets on the recorder to the 

corresponding component video input 
sockets (usually labelled as Y Pb/Cb Pr/Cr 
or YUV) on the TV.

B

 Connect the audio cable (red/white - not 

supplied) from the AUDIO OUT L/R 
sockets on the recorder to the audio 
input sockets on the TV.

Note:
To enable Y Pb Pr (YUV) connection, you 
must set the recorder’s video output 
correctly.   

A

 Make an addition video connection from 

this recorder to your TV using Scart, 
S-Video or Video (CVBS).   

B

 Turn on your TV to the correct viewing 

channel for the above video connection.

C

 When you have completed the 

installation and set-up, change the video 
output setting of this recorder as 
follows:.

1) Press OPTIONS.
2) Move to { Settings } > { Video 

output } > { Active video output } 
> { Comp. video (YUV) }, then 
press OK to confi rm.

  To activate Progressive Scan output, see 

‘Other information - Setting up 
Progressive Scan feature’ for details.

D

 Switch your TV to the correct viewing 

channel for the Component video 
connection (refer to your TVs user 
manual).

TV

Option 4