Philips DVDR5520H/05 Benutzerhandbuch

21

Option 1
If your Cable Box/Satellite Receiver 
has only an antenna output socket 
(RF OUT or TO TV),
see ‘Basic Recorder Connections - 
Connecting the antenna cables’ for 
details.

Option 2 (as shown on the above illustration)
If your Cable Box/Satellite Receiver 
has a Scart output socket

A

 Keep the existing antenna connection 

from the Cable Box/Satellite Receiver to 
your TV.

B

 Connect a scart cable (supplied) from the  

EXT1 TO TV socket on the recorder 
to the corresponding SCART socket on 
the TV.

C

 Connect another scart cable (not 

supplied) from the EXT2-TO VCR/
SAT socket on the recorder to the Scart 
socket (usually labelled as TV OUT or 
TO VCR) on the Cable Box/ Satellite 
Receiver.

D

 Connect the G-LINK cable (supplied) to 

the G-LINK socket on the recorder.

E

 Place the G-LINK transmitter in front of 

the Cable Box/ Satellite Receiver near to 
the IR sensor (remote sensor) so that its 
infrared detector can receive a clear 
signal.

 

This allows you to control the tuner 

of the Satellite Receiver/Cable Box 
through the GUIDE Plus+ system.

TV

B

C

D

E

Cable Box / 
Satellite Receiver

(rear view)

(front view)