Epson FX-890 Merkblatt

Paper Handling

R4CC530
long.bk

Rev. E

A5 size

PAPER.fm

6/23/03

Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson

Note:
If the Tear Off/Bin light is flashing, the paper is in the tear-off
position. If you press the Tear Off/Bin button again, the printer
feeds your paper to the next top-of-form position.

2. Press the Tear Off/Bin button. The printer advances the paper

to the tear-off edge.

Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the top-of-form position.

Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
function as described in “Adjusting the tear-off position” on page
62.

3. Tear off the printed document using the tear-off edge of the

printer cover.

4. To feed the continuous paper backward out of the printer and

into the standby position, press the Load/Eject button.

To remove the remaining paper from the printer, press the
Load/Eject button to feed the paper backward to the standby
position. Then open the sprocket covers of the tractor and remove
the paper.

Caution:
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.