Dixon 36 Benutzerhandbuch

DIXON

-51

LUBRICATION

Check the oil level in the engine when the machine is 

standing level and the engine is stopped.
Remove the dipstick, wipe it clean, and then replace it.
The dipstick should be screwed into place.
Take the dipstick out again and read the oil level.

The oil level should lie between the markings on the 

dipstick. If the level is approaching the “ADD” mark, fill 

the oil to the “FULL” mark on the dipstick.
Never fill to above the “FULL” mark.
The oil is filled through the hole for the dipstick.

API class SF, SG, SH, SJ or higher must be used. 

Syntetic oil SAE 5W-30 or 10W-30 is recommended at 

all temperatures. Mineral oil SAE 5W-30, 10W-30 can 

be used between
-18 °C/0 °F and +5 °C/40 °F. At temperature above +5 

°C/40 °F single grade SAE 30 must be used.
The engine holds 0.88 qt (1.0 liters) of oil excluding 

the filter, including filter 2 qt
(1.9 liters).

8011-500

8009-159

Drain the engine oil in accordance with the work 

1. 

description under the heading Engine Oil/Change 

Engine Oil.
Remove the oil filter. If necessary, use a filter 

2. 

remover.
Wipe new, clean engine oil onto the seal for the 

3. 

new filter.
Mount the filter by hand with + 3/4 turn.

4. 

Run the engine warm, then check that there are no 

5. 

leaks around the oil filter seal.
Check the oil level in the engine, fill if necessary. 

6. 

The oil filter holds 0.1 qt (0.1 liters) of oil.

8011-734