Lowrance electronic HDS 8 Benutzerhandbuch

104

Controls  network  configuration,  data  sources,  serial  port 

settings, waypoint sharing and allows you to monitor 

network performance (NMEA 2000 and ethernet) and 

network devices. 
To access the Network menu, select Network from the 

Settings menu and press 

enTeR.

Auto Configure
Resets all Data Sources to default settings 

and removes all instances on networked HDS 

units. 
To auto configure a network:

1.  Select Auto Configure from the Network menu and press 

enTeR. 

2.  Highlight Yes and press 

enTeR. 

Data Sources
An advanced feature that allows you to use data from a network data source or data 

from a sensor connected to your unit. 
If, for example, you do not want to use your 

unit’s internal GPS antenna, you could use an 

external GPS antenna connected to an ethernet 

or NMEA 2000 network. 
To access the Data Source Selection Screen, 

highlight Data Sources on the Network menu 

and press 

enTeR. 

1.   Select a data category and press the keypad to the right. A 

subcategory list will appear. 

2.   Select  a  subcategory  and  press  the  keypad  to  the  right. A  list  of 

sources will be displayed.

3.   Highlight a desired data source and press 

enTeR.