Lowrance electronic HDS 8 Benutzerhandbuch
106
Settings
To select a scope:
1. Highlight Scope on the selected device’s data source menu and
press
enTeR.
2. Use the keypad to select Global or Local and press
enTeR.
Reset Global and Reset Local
Selecting Reset Global will reset all the source selections to default settings and
removes all instances on all networked HDS units.
Reset Local is used to change all source selections on your HDS unit from Local to
Reset Local is used to change all source selections on your HDS unit from Local to
Global.
To reset global or local sources:
To reset global or local sources:
1. Highlight Reset Global or Reset Local and press
enTeR. A confirma-
tion message will appear.
2. Select Yes and press
enTeR.
Device List
Displays a list of devices connected to a NMEA
Displays a list of devices connected to a NMEA
2000 network.
To access the device list, Select Device List from
To access the device list, Select Device List from
the Network menu and press
enTeR.
From the Device List you can:
• View device data
• Change the device instance
• Configure device alarms
• Configure devices
• Calibrate devices
• Enable/disable WAAS/EGNOS/MSAS for GPS antenna by
• Change the device instance
• Configure device alarms
• Configure devices
• Calibrate devices
• Enable/disable WAAS/EGNOS/MSAS for GPS antenna by
configuring HDS iGPS
Device Menu
Controls the way data is displayed on the Device list. To
Controls the way data is displayed on the Device list. To
access the Device menu, highlight the desired device and press
MenU.
Device List