Wasp WLS9500 Betriebsanweisung

User Preferences 4-7

This parameter determines whether or not power remains on after a decode attempt. When in reduced power mode, the 
scanner enters into a low power consumption mode to preserve battery life after each decode attempt. When in 
continuous power mode, power remains on after each decode attempt.

This parameter determines the pattern (mode) of scanning. Scan the appropriate bar code below to set the scanning 
mode.

•

Single-line Only - Scan Single-line Only for a single-line scan mode. The laser has no up and down scan line 
movement (no raster). (For an example of a single-line scan, see 

.)

•

Multi-line Smart Raster - Scan Multi-line Smart Raster for a scan line begins as a single line and moves up 
and down (rasters) when a partial scan of a bar code is detected, or no bar code is decoded 500 ms after the 
trigger is pulled. Upon seeing a stacked RSS code, the scanner immediately rasters. (For an example of a multi-
line scan, see 

.)

•

Multi-line Always Raster (default) - Scan Multi-line Always Raster for rastering (up and down scan line 
movement) to begin immediately.