Panasonic PV-GS36 Betriebsanweisung

„

•  The [STATUS] Indicator goes off when the 

power turns off.

•  In Tape Recording Mode or Card Recording 

Mode, if the [OFF/ON] Switch is set to [ON] 
while the LCD Monitor and Viewfinder are 
closed, the power turns off.

When the [OFF/ON] Switch is set to [ON], the power 
can be turned on and off with the LCD Monitor and 
the Viewfinder when the unit is in Tape Recording 
Mode or Card Recording Mode.

•  The LCD Monitor or the Viewfinder will be 

activated.

•  The power will not turn off if the LCD Monitor is 

closed and the Viewfinder is retracted.

•  The [STATUS] Indicator 

 automatically goes 

off and the power turns off. (If Quick Start is set 
to [ON] (p. 29), the unit goes into Quick Start 
standby mode and the [STATUS] Indicator 
lights Green.)

•  Even if the LCD Monitor is closed or the 

Viewfinder is retracted while recording on 
a tape, the power does not turn off. (The 
Viewfinder stays lit up.)

•  The [STATUS] Indicator lights Red and turn on 

the power.

SETUP   ENTER    EXIT

YES

NO

SET DATE AND TIME

When the Camcorder is turned on for the first time, 
[SET DATE AND TIME] will appear. Select [YES] 
and set the date and time.
•  If the screen shows the incorrect Date/Time, then 

adjust it.

•  If the built-in battery is weak, the [ 

 ] Indication 

flashes. In this case, charge the built-in battery.

•  The clock uses the 12-hour system.

•  Year will cycle in the order shown below.

2000, 2001, ..., 2089, 2000, ...

•  The clock operation starts from [00] second.

CLOCK SET

JAN .01.2006  12:00AM

    SETUP
  SET   ENTER    EXIT

„

•  The Date and Time function are driven by a 

built-in lithium battery.

•  Make sure to check the time before recording 

because the built-in clock is not very accurate.