Panasonic PV-GS36 Betriebsanweisung

„

If [ 

 ] or [--] is appears when the Camcorder is 

turned on, then the built-in lithium battery has run 
down. Use the steps below to charge the battery. 
When the battery is inserted for the first time after 
charging, [SET DATE AND TIME] will appear. 
Select [YES] and set the date and time.
Connect the AC adaptor to the Camcorder or 
place the battery on the Camcorder, and the built-
in lithium battery will be recharged. Leave the 
camera as is for approx. 24 hours, and the battery 
will drive the date and time for approx. 6 months. 
(Even if the [OFF/ON] Switch is set to [OFF], the 
battery is still being recharged.)

Before using the Viewfinder, adjust the field of view 
so that the displays inside the Viewfinder become 
clear and easy to read.

•  The Viewfinder will be activated.

With the LCD Monitor open, you can also record the 
picture while watching it.

•  The LCD Monitor will be activated.
•  It can open up to 90°.

•  The LCD Monitor can rotate a maximum of 

180° 

 from the vertical position upwards 

and a maximum of 90° 

 to the downward 

direction. Forcefully rotating the LCD Monitor 
beyond these ranges will damage the 
Camcorder.

„

Push the LCD Monitor until it is securely locked.
•  Make sure the Card Slot Cover is closed.

•  You can adjust the brightness of the Viewfinder 

from the Menu.

•  The brightness and color level of the LCD Monitor 

can be adjusted from the Menu.

•  If it is forcibly opened or rotated, the Camcorder 

may be damaged or fail.

•  Check that the Card Slot Cover is closed before 

closing the LCD Monitor.

•  If the LCD Monitor is rotated by 180° towards the 

lens and the Viewfinder is opened (when recording 
yourself), the LCD Monitor and the Viewfinder 
simultaneously light.

When [   LCD SET] or [   EVF SET] on the [   
SETUP] Sub-Menu is set to [YES], the following 
items are displayed.

Adjusts the brightness of the image on the LCD 
screen.

Adjusts the color saturation of the image on the LCD 
screen and the Viewfinder.

Adjusts the brightness of the image in the Viewfinder.

„

Move the Joystick Control [▲] or [▼] and select 
the item to be adjusted, and then move the 
Joystick Control [◄] or [►] to raise or lower the 
number of vertical bars in the Bar Indication.
•  More vertical bars indicates stronger brightness 

or color saturation.

•  Press the [MENU] Button or the Joystick Control 

to complete the settings.

LCD SET

     SET
SETUP   ENTER    EXIT

EVF SET

  SET   ENTER    EXIT