Enterasys csx400 Betriebsanweisung
FRAME RELAY CONFIGURATION
Local Management User’s Guide
A-7
8.
Use the arrow keys to highlight the SAVE command. Then press ENTER. The message “Save
Done!” displays and Local Management saves the changes to memory and the device reboots.
Local Management must be re-entered for any further configuration.
Done!” displays and Local Management saves the changes to memory and the device reboots.
Local Management must be re-entered for any further configuration.
WPIM-SY Interface Configuration
For Frame Relay, this screen is only accessed to configure FR LMI. Refer to
and
proceed with the following steps.
1.
Access the WAN Interface Configuration screen by using the arrow keys to highlight the WAN
Int Config option, then press ENTER.
Int Config option, then press ENTER.
2.
Use the arrow keys to highlight ProtMgrIface. Choose the interface to be configured.
3.
Use the arrow keys to highlight FR LMI. Press the SPACE bar to choose from ANSI 94,
No LMI, T1.617-D, or Q.933-A, then press ENTER.
No LMI, T1.617-D, or Q.933-A, then press ENTER.
NOTE
Set FORCE CTS and FORCE DSR to YES only if the CSU/DSU does not support
these flow control terms.
these flow control terms.
NOTE
The choice No LMI under FR LMI is a test mode only and must not be used in a
practical application.
practical application.