Cisco SG300-10 Anleitung Für Quick Setup

Thank you for choosing the Cisco 300 Series Managed Switch, a Cisco 
Small Business network communications device. This device is designed 
to be operational right out of the box as a standard bridge. In the default 
configuration, it will forward packets between connecting devices after 
power up. 

• Cisco  SF 300-08, SF 302-08, SF 302-08MP, SF 302-08P, SG 300-10, 

SG 300-10MP, SG 300-10P, SG 300-20, SF 300-24, SF 300-24P, SG 
300-28, SG 300-28P, SF 300-48, SF 300-48P, or SG 300-52 Managed 
Switch

• Rackmount Kit

• Power Cord (power adapter included with 8-port devices)

• This Quick Start Guide

• Product CD 

• Serial Cable

This guide will familiarize you with the layout of the managed switch and 
describe how to deploy the device in your network. For additional 
information, see 

.

There are three ways to physically install the switch:

• Set the switch on a flat surface.

• Mount the switch on a wall (8-port devices only).

• Mount the switch in a standard rack (1 rack unit high). 

Do not deploy the device in a location where any of the following 
conditions exist:

High Ambient Temperature—The ambient temperature must not 
exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Reduced Air Flow—Both side panels must be unobstructed to prevent 
overheating.

Mechanical Overloading—The device should be level, stable, and 
secure to prevent it from sliding or shifting out of position.