Cisco me 3400 Verweisanleitung
C-26
Cisco ME 3400 Ethernet Access Switch Command Reference
OL-9640-07
Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands
show platform policer cpu
show platform policer cpu
Use the show platform policer cpu privileged EXEC command to display CPU control-plane policer
statistics per feature or the indexes and the corresponding feature for the specified port.
statistics per feature or the indexes and the corresponding feature for the specified port.
show platform policer cpu {classification | interface interface-id} [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
For CPU protection of user network interfaces (UNIs) and enhanced network interfaces (ENIs), the
switch pre-allocates the 27 CPU protection policers, numbered 0 to 26. A policer of 26 means a drop
policer; any traffic type shown as 26 on any port is dropped. A policer of a value of 0 to 25 means that
a rate-limiting policer is assigned to the port for the control protocol. A policer value of 255 means that
no policer is assigned to a control protocol. Network node interfaces (NNIs) have no policers assigned.
switch pre-allocates the 27 CPU protection policers, numbered 0 to 26. A policer of 26 means a drop
policer; any traffic type shown as 26 on any port is dropped. A policer of a value of 0 to 25 means that
a rate-limiting policer is assigned to the port for the control protocol. A policer value of 255 means that
no policer is assigned to a control protocol. Network node interfaces (NNIs) have no policers assigned.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
are not displayed, but the lines that contain Output are displayed.
classification
Displays policer statistics per feature.
interface
interface-id
interface-id
Display the policer indexes for a specific interface.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(25)EX
This command was introduced.