Cisco me 3400 Guia De Referência

Use the show platform policer cpu privileged EXEC command to display CPU control-plane policer 
statistics per feature or the indexes and the corresponding feature for the specified port.

show platform policer cpu {classification | interface interface-id} [ | {begin | exclude | include} 

expression]

Privileged EXEC

For CPU protection of user network interfaces (UNIs) and enhanced network interfaces (ENIs), the 
switch pre-allocates the 27 CPU protection policers, numbered 0 to 26. A policer of 26 means a drop 
policer; any traffic type shown as 26 on any port is dropped. A policer of a value of 0 to 25 means that 
a rate-limiting policer is assigned to the port for the control protocol. A policer value of 255 means that 
no policer is assigned to a control protocol. Network node interfaces (NNIs) have no policers assigned.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output 
are not displayed, but the lines that contain Output are displayed.

Displays policer statistics per feature.

interface 
interface-id

Display the policer indexes for a specific interface.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

12.2(25)EX

This command was introduced.