Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-49

This section describes how to reset the printer’s power-on defaults, all of the

factory defaults, or the factory defaults only for MENU1 and MENU2.

Power-on defaults are the settings saved in the printer’s permanent memory.

The defaults are enabled whenever you turn the printer on.  The easiest way

to reset the power-on defaults is to turn the printer off and then on again.

This method is useful if you have made changes in setup mode that you do

not want to save.

Factory defaults are those settings preselected at the factory.  For a list of the

printer’s factory defaults, see the section Printing a List of Selected

Options earlier in this chapter.  To reset the factory defaults for all functions,

proceed as follows:

1. Turn off the printer.

2. While pressing the MENU, TEAR OFF, and ONLINE buttons, turn

on the printer.  Continue to press all three buttons until the printer

beeps.

The factory defaults are now reset.

This method resets factory defaults for MENU1 and MENU2 options, listed

in Table 5.3, but does not reset the printer hardware, print position adjust-

ment, and configuration options.  To reset the factory defaults in MENU1

and MENU2, proceed as follows: