Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-50

 <<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST   SELF-TST  HEX-DUMP

  V-ALMNT

1. Enter setup mode.

Press the TEAR OFF button and the ONLINE button simultaneously

until the printer beeps.  Wait for the printer to stop printing and

check that the following <<FUNCTION>> menu is printed:

2. Select the DEFAULT function.

Repeatedly press the LOAD button or the LF/FF button to position

the red cursor under DEFAULT.  Press the TEAR OFF button or the

MENU button to select the DEFAULT function.  The printer reprints

the <<FUNCTION>> menu.  The default values in MENU1 and

MENU2 are now reset.

3. Do either of the following:

See the section Changing MENU1 and MENU2 Options.  To exit

setup mode and save the new defaults, make sure that the red cursor

is positioned under SAVE & END, then press the TEAR OFF button

or the MENU button.

This section describes how to use the following diagnostic functions:

•

SELF-TST

•

HEX-DUMP

•

V-ALMNT

These functions are used for checking print quality and diagnosing printer

problems.  HEX-DUMP also provides useful information for programmers.