Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-53

To print hex dumps, make sure that continuous forms paper is loaded into

the printer.  Then proceed as follows:

1. Enter setup mode.

Press the TEAR OFF button and the ONLINE button simultaneously

until the printer beeps.  Wait for the printer to stop printing and

check that the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST   SELF-TST  HEX-DUMP

  V-ALMNT

2. Select the HEX-DUMP function.

Repeatedly press the LOAD button or the LF/FF button to position

the red cursor under HEX-DUMP, then press the TEAR OFF button

or the MENU button to select the HEX-DUMP function.  The printer

goes online and prints a header and a short help menu.

3. Print the hex dump.

To start hex dump printing, send your file or program to the printer.

The printer goes online and prints the hex dump.

Press the MENU button or the TEAR OFF button to pause during

hex dump printing.  To resume hex dump printing, press the button

again.