Fujitsu dl-3750 Benutzerhandbuch

USING SETUP MODE

User's Manual

5-55

The V-ALMNT function corrects the vertical character displacement that

sometimes occurs with bidirectional printing.  Characters printed from left to

right are not aligned with characters printed from right to left as shown

below:

This example shows how printing looks

 when characters are vertically

misaligned.  Note that the left

 margin is not straight.

If you notice misaligned printing, use the following procedure to check and

correct the vertical print alignment.

Make sure that continuous forms paper is loaded in the printer.  If possible,

use forms at least 216 mm (8.5 inches) wide for 80 column printers or

356mm (14inches) wide for 136 colmun prnters to avoid printing on the

platen.

However, you can also use letter or A4 size forms if you set the WIDTH

option in MENU1 to 8 inches.

See the section Changing MENU1 and MENU2 Options for details.  Then

proceed as follows to check and correct vertical print alignment:

1. Enter setup mode.

Press the MENU button and the TEAR OFF button simultaneously

until the printer beeps.  Wait for the printer to stop printing and

check that the following <<FUNCTION>> menu is printed:

<<FUNCTION>>

  SAVE&END  MENU1  MENU2  HARDWRE  ADJUST  CONFIG  DEFAULT  LIST   SELF-TST  HEX-DUMP

  V-ALMNT