Blodgett 1060 Servicehandbuch

Seite von 2
BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
MODEL 1060
Deck Oven
EXTERIOR CONSTRUCTION
 Full angle iron frame
 Stainless steel front, top, sides and back
 Spring assist doors with concealed hinges
 Heavy chrome plated tubular steel door handle
 32" (794mm) black powder coated legs (for single units)
 12" (273mm) black powder coated legs (for double units)
 Burner door opens easily for ignition, cleaning or adjustment, without 
removal of any fastenings
 Vitreous fiber insulation at top, back, sides, bottom and doors
INTERIOR CONSTRUCTION
 60"  x 36" x 10" (1524mm x 914mm x 254mm) oven compartment interior. 
 Aluminized steel baking compartment liner 
 Aluminized steel combustion chamber
 Ultra Rokite deck supported by an angle iron frame 
OPERATION
 Two free-floating, easily removable duplex-tube burners
 Removable fixed orifices on main and pilot burners
 Main gas valve, temperature control valve and safety pilot valve fully within
section body and are accessible through a covered and ventilated compart-
ment in front
 Air mixers with adjustable air shutters and locking device
 Snap throttle thermostat with temperature control range of 300°F (150°C) to 
650°F (340°C)
STANDARD FEATURES
 Fahrenheit dial 300°F to 650°F 
 Ultra Rokite deck
 Two year oven parts and one year labor warranty*
 Five year limited oven door warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES 
(AT ADDITIONAL CHARGE)
 Legs:
 12" (273mm) stainless steel legs
 32" (794mm) stainless steel legs
 Flexible gas hose with quick disconnect and
restraining device:
 36" (914 mm)
 48" (1219mm)
 Stainless steel stacking crown angle leg frame
assembly
 Casters
 Stainless steel crown angle trim
 Flue connector
 Vent kit
OPTIONS AND ACCESSORIES 
(AT NO ADDITIONAL CHARGE)
 Centigrade dial, 150°C to 340°C
 No. 12 gauge (3.02mm) press-formed, reinforced
and flanged aluminized steel deck (Model 1060-S)
1060 - Single/Double
Project
Item No.
Quantity
Ovens consist of basic sections and are a complete and separate unit
capable of operating alone or in combination.
All data is shown per oven section, unless otherwise indicated.
Refer to operator manual specification chart for listed model name.