Toshiba 2000 Betriebsanweisung
43
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.3.2
6
Align the connector on the memory module with the
computer’s connector and carefully press the module
above the connector to ensure a solid connection.
computer’s connector and carefully press the module
above the connector to ensure a solid connection.
CAUTION: Do not touch the connectors on the memory module or
on the computer. Debris on the connectors may cause memory
access problems.
on the computer. Debris on the connectors may cause memory
access problems.
Press only the area above the connector. Do not press on the
electronic components.
electronic components.
7
Secure the memory model with the one screw that came
with the memory module.
with the memory module.
CAUTION: Use only the screw that came with the memory module.
8
Seat the memory slot cover and secure it with the two
screws.
screws.
NOTE: Use a point size 0 Phillips screwdriver.
9
When you turn the computer on, it should automatically
recognize the total memory capacity. Use the Toshiba
Hardware Setup program to verify that the added
memory is recognized. If it is not recognized, check the
module’s connection.
recognize the total memory capacity. Use the Toshiba
Hardware Setup program to verify that the added
memory is recognized. If it is not recognized, check the
module’s connection.
NOTE: When you view the memory display, the total amount will
be reduced by 16 MB, which is used for VRAM.
be reduced by 16 MB, which is used for VRAM.