Toshiba 2000 Betriebsanweisung
44
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.3.2
Removing a memory module
To remove the memory module:
1
Turn the computer off and remove all cables connected to
the computer.
the computer.
CAUTION: Do not try to remove a memory module with the
computer in Standby or Hibernation mode. You can damage the
computer and the memory module.
computer in Standby or Hibernation mode. You can damage the
computer and the memory module.
2
Turn the computer upside down and remove the main
battery module.
battery module.
3
Remove the two screws securing the memory module
cover and store them in a safe place.
cover and store them in a safe place.
4
Lift off the cover.
5
Remove the screw that secures the memory module.
6
Fit two slender objects such as tweezers under the
memory module on each side of the connector and pry up
to disconnect the module.
memory module on each side of the connector and pry up
to disconnect the module.
7
Grasp the memory module by the sides and lift it out.
CAUTION: Do not touch the connectors on the memory module or
on the computer. Debris on the connectors may cause memory
access problems.
on the computer. Debris on the connectors may cause memory
access problems.
8
Seat the cover and secure it with the two screws.
Connecting a mouse
You may want to use a USB-compatible mouse instead of the
TouchPad, the computer’s built-in pointing device.
TouchPad, the computer’s built-in pointing device.