Quantum DAT 160 Verweisanleitung
Installing a DLT, SDLT, VS, LTO, or DAT Tape Drive Into a Linux Operating System
6464215-01, Rev B
January 2006
Accessing Devices Using /dev/st* Device Nodes
12
You should see a block of four listings for each device. The list will look
similar to the following:
If one or more device node listings are not present, see
For an explanation of what each part of the listing means, see
What To Do if a Device
Node is Missing
Node is Missing
0
If any of the
st
device node listings are not present in the
/dev
directory, you
need to create them.
Use the
Use the
mknod
on page 16 and
Refer to the following documentation for detailed instructions:
• Your Linux documentation
•
• Your Linux documentation
•
st(4) man page
•
mknod(1) man page
For this type of
device...
device...
The list of /dev device files will look similar to...
Auto-rewind
crw-rw---- 1 root disk 9, 0 Sep 15 2003 st0
crw-rw---- 1 root disk 9, 96 Sep 15 2003 st0a
crw-rw---- 1 root disk 9, 32 Sep 15 2003 st0l
crw-rw---- 1 root disk 9, 64 Sep 15 2003 st0m
No-rewind
crw-rw---- 1 root disk 9, 128 Sep 15 2003 nst0
crw-rw---- 1 root disk 9, 224 Sep 15 2003 nst0a
crw-rw---- 1 root disk 9, 160 Sep 15 2003 nst0l
crw-rw---- 1 root disk 9, 192 Sep 15 2003 nst0m