Quantum DLT-V4 Betriebsanweisung
Chapter 5 Installing the Tabletop SCSI Tape Drive
Unpacking the Tabletop SCSI Tape Drive
DLT-V4 Product Manual
35
Unpacking the Tabletop SCSI Tape Drive
5
Before you begin, clear a desk or table so that you can unpack the tape
drive. You also need to select a location near the server or workstation
that has room for the tape drive to sit without being crowded.
Before you do anything else, unpack and inspect the tabletop SCSI tape
drive for shipping damage. If you notice any damage, report it both to the
drive for shipping damage. If you notice any damage, report it both to the
sales representative and to the shipping company immediately.
8
Complete installation by connecting the power
cable to the tape drive, server or workstation, and
all peripheral devices. Plug the power cable into
the nearest power outlet and apply power to all
devices.
9
Confirm the installation.
Note:
If the room in which you are working differs from the
temperature at which the tape drive was shipped or stored by
30 ºF (17 ºC) or more, let the tape drive acclimate to the
surrounding environment for at least 12 hours before opening
the shipping carton.
Note:
Save the packing materials in case you need to move or ship
the tape drive in the future. You must ship the tabletop tape
drive in the original (or equivalent) packing materials or you
will invalidate the warranty.
Step
Instruction
Page