Quantum DLT-S4 Betriebsanweisung
Chapter 12 Installing the Tabletop Tape Drive
Confirming the Installation
DLT-S4 Product Manual
107
Confirming the Installation
12
To confirm the installation:
1
Turn on the DLT-S4 tabletop tape drive.
2
Turn on the host computer.
The screens displayed at power-on contain:
• BIOS
• Operating system
• SCSI controller information
The screens displayed at power-on contain:
• BIOS
• Operating system
• SCSI controller information
If the first screen displays host adapter and SCSI ID information
indicating the drive is a Quantum product, then the installation was
successful.
If the installation was NOT successful, see
If the installation was NOT successful, see
Adding an Additional Device
12
Once you have successfully confirmed the installation of your tape drive,
you may add another device (you may have a maximum of two devices)
you may add another device (you may have a maximum of two devices)
to the SCSI bus.
Follow these steps to install the tape drive as a daisy-chain connection:
Follow these steps to install the tape drive as a daisy-chain connection:
1
Ensure that all SCSI devices have unique SCSI IDs (see
Note:
Use care when connecting the cables to avoid bending or
damaging the connector pins.