Quantum DLT VS160 Betriebsanweisung

Chapter 1  Installing the ValueLoader
Connecting the SCSI and Power Cables

12

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

Slide the ValueLoader onto the rails and secure the mounting bracket 

to the rack using the screws and clip nuts from the rackmount 

hardware package, as shown in 

Figure 7  Sliding the 
ValueLoader into the 
Rack Slot, Securing 
Mounting Bracket

Connecting the SCSI and Power Cables

1

To connect the SCSI and power cables to the ValueLoader, follow these 

steps:

Shut down and turn off the selected server. Turn off all attached 

accessory devices, such as printers and other SCSI devices. Remove 

the power cables from the server and all attached accessories.

Failure to remove the power cables from these devices 

could result in damage to the ValueLoader.