Quantum DLT VS160 Betriebsanweisung

ValueLoader Administration

Running the ValueLoader System Test

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

39

Running the ValueLoader System Test

3

The System Test option cycles the ValueLoader through the process of 

loading, calibrating, and unloading all cartridges in the carousel. 

Running a System Test verifies the operational soundness of both the 

ValueLoader and tape drive. The System Test continues indefinitely until 

you press the 

 button. All regular backup and restore operations 

are suspended while a System Test is in progress.

To run a System Test:

From the Home screen or main menu, press the 

 or 

button until 

Diagnostics

 appears on the top line of the LCD screen. Press the 

 

button to select. 

System Test

 appears on the LCD screen. Press the 

 button to 

begin the test.
The 

Test Count

 displays the number of load-calibrate-unload cycles 

that have been completed during the test.

Press the 

 button to end the test.

Retrieving Information About the ValueLoader

3

The 

 menu provides access to information about the 

ValueLoader, including the cycle count, event log, and firmware revision.

3

This option displays the total system cycle count, incrementing each time 

a tape is loaded into the drive or exported from the ValueLoader.
To use this option, follow these steps:

At least one cartridge must be in inventory before running 

System Test.