Quantum DLT VS160 Betriebsanweisung

Diagnostics and Troubleshooting
ValueLoader Error Codes

56

ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

Ensure the carrier is properly installed on the belt by gently pressing 

on the top of the carrier and sliding it back and forth. If it is properly 

attached to the belt, it should not move. If it moves, reinstall the 

carrier.

Replace the top cover of the ValueLoader and reinstall the cover 

screws and mounting brackets (if rackmounted).

ValueLoader Error Codes

4

If an error occurs during operation of the ValueLoader, the ValueLoader 

stops the current operation and displays an error code on the top line of 

the LCD screen. Unless otherwise noted in 

, attempt to resolve the 

error by resetting or cycling power on the ValueLoader and retrying the 

last operation. If the error persists, contact support personnel.
To view the error log, follow these steps:

From the Home screen or main menu, press the 

 or 

button until 

Information

 appears on the top line of the LCD screen. Press the 

 

button to access the available options.

Press the 

 or 

 button until 

View Event Log

 appears on the LCD 

screen. The LCD screen also displays the quantity of errors and 

events stored in the error log.

Press the 

 button to access the most recently logged error 

message.

Press the 

 or 

 button to display each error in the log.

Press 

 when done.

A description of each of the error codes is provided in the following table.