Champion sd-36 Техническое Руководство
Universal Pan
and Rack Washer
and Rack Washer
MODEL SD-36
MODEL SD-36 WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Dimensions shown in inches
52"
38"
14"
Hot Water
Connection
Wash Down
Hose With
Spray Nozzle
Rinse Tank
Drain Valve
Adjustable Legs
SPECIFICATIONS
Machine Construction
12, 14, 16 & 18 gauge Stainless steel.
All seams are tig-welded.
Door
Stainless Steel, split door design. The top
half rises while the lower half folds down
to provide a load/unload table.
to provide a load/unload table.
Spray Arm Assembly
Water driven STAINLESS STEEL spray
arm assemblies, with STAINLESS STEEL
jets, removable end caps and hand-
operated quick release mechanism for
easy cleaning and reassembly.
jets, removable end caps and hand-
operated quick release mechanism for
easy cleaning and reassembly.
Filter
Perforated, removable, Stainless Steel
baskets.
Water Pump
15 Hp, 208/240 or 480 volt, 3 phase,
60 cycle with output of 250 gallons per
minute at 35 to 45 P.S.I.
minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad
operation of “power on”, “stop” and
“short, medium or long wash cycles”.
A digital display indicates “time
remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A
buzzer is also included to provide an
audible indication of time to unload.
A pre-programmed circuit board allows
the push pad to be used as a “diagnostic
center” by displaying “error codes” for
ease of troubleshooting.
“short, medium or long wash cycles”.
A digital display indicates “time
remaining” for each cycle. LED’s indicate
wash, rinse and unload functions. A
buzzer is also included to provide an
audible indication of time to unload.
A pre-programmed circuit board allows
the push pad to be used as a “diagnostic
center” by displaying “error codes” for
ease of troubleshooting.
Gauges
Moisture resistant gauges measure Wash
Temperature, Wash Pressure and Rinse
Temperature.
Temperature.
Wash Tank
Stainless Steel with electric, infrared gas,
steam or steam coil heating, thermostatically
controlled, low water protected, sloped to
drain with a 65-gallon capacity.
controlled, low water protected, sloped to
drain with a 65-gallon capacity.
Rinse Tank
Stainless Steel with 18 Kw 208/240 or
480 electric, infrared gas or steam coil
booster heater to provide 180°F/190°F
hot sanitizing rinse.
booster heater to provide 180°F/190°F
hot sanitizing rinse.
Racks
Stainless Steel rod, built to match specific
washing requirements.
88-1/2"
83"
71-1/8"
83"
74-3/4"
Door
Opening
Electrical
Control
Panel
Rinse Thermometer
Wash Pressure Gauge
Wash Thermometer
Digital Control and
Information Center
12" Dia. Vent
Overflow
Connection
Wash Pump
28-1/2"
Door
Opening
35-1/2"
Lift
Height
84-1/2"