Champion sd-36 Техническое Руководство
Cabinet
83" wide x 38" deep x 71-1/8" high. Overall height with door open: 87-1/8" (106-1/2"
with optional infrared gas heated rinse tank). Door opening: 74-3/4" wide x 28-1/2"
high. Constructed of 12, 14 & 16 gauge, type 304 #3 finish, STAINLESS STEEL. All
seams tig-welded, cleaned and polished.
with optional infrared gas heated rinse tank). Door opening: 74-3/4" wide x 28-1/2"
high. Constructed of 12, 14 & 16 gauge, type 304 #3 finish, STAINLESS STEEL. All
seams tig-welded, cleaned and polished.
Door
Front-loading, split door design for easy loading and unloading. The top half of the
door system rises while the lower half folds down to create a space saving drain
table. Door is interlocked with limit switch to prevent machine operation while door is
open. Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
door system rises while the lower half folds down to create a space saving drain
table. Door is interlocked with limit switch to prevent machine operation while door is
open. Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
Recirculating Wash Tank
Heated by one 18 KW 208/240 at 480 volt electric immersion heaters, thermostatically
controlled wash temperature and low water protection system. 65 gallons, 14 gauge
STAINLESS STEEL, sloped to drain. Infrared gas and steam heating options available.
controlled wash temperature and low water protection system. 65 gallons, 14 gauge
STAINLESS STEEL, sloped to drain. Infrared gas and steam heating options available.
Wash Tank Filter
Perforated, STAINLESS STEEL basket type designed for increased effectiveness
and easy cleaning without emptying wash tank.
and easy cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
automatic option.
Wash Pump
15 HP, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 250 gallons per
minute at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed channel
base.
minute at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed channel
base.
Spray Arm Assemblies
Water driven STAINLESS STEEL spray arm assemblies, with STAINLESS STEEL
jets, removable end caps and hand-operated with quick release mechanism for easy
cleaning and reassembly.
jets, removable end caps and hand-operated with quick release mechanism for easy
cleaning and reassembly.
Sanitizing Rinse Tank
STAINLESS STEEL, 20 gallon capacity, with one (1) 18 KW 208/240 or 480 volt
electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 12 gallons
per 30 second cycle. Infrared gas and steam coil heating options available as well as
pumped rinse systems.
electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 12 gallons
per 30 second cycle. Infrared gas and steam coil heating options available as well as
pumped rinse systems.
Rinse Supply Valve
Size 1" brass material, solenoid type, automatic.
Final Rinse Piping
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or
PIPING optional STAINLESS STEEL full cone rinse jets.
PIPING optional STAINLESS STEEL full cone rinse jets.
Control and Information Center
120 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING”
for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A
pre-programmed circuit board allows the push pad to be used as a “DIAGNOSTIC
CENTER” by displaying “ERROR CODES” for ease of troubleshooting. Moisture
resistant gauges measure Wash Temperature, Wash Pressure and Rinse Temperature.
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING”
for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A
pre-programmed circuit board allows the push pad to be used as a “DIAGNOSTIC
CENTER” by displaying “ERROR CODES” for ease of troubleshooting. Moisture
resistant gauges measure Wash Temperature, Wash Pressure and Rinse Temperature.
External Rinse Hose
Externally mounted rinse hose for easy cleaning and maintenance of machine.
Steam Exhaust Vent
Steam exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled collar for PVC
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556 Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(1M) 1/06 Printed in U.S.A.
SPECIFICATIONS
MODEL SD-36 POT, PAN &
UTENSIL WASHER