Champion pp-28 Betriebsanweisung

COMPONENT REPLACEMENT

This pot and pan washer utilizes a magnetic reed door safety switch mounted on the right hand side
of the base below the front door and to the left hand side of the side doors. A door magnet operates
the safety switch when the door is fully closed. The dishwasher will not operate if the door is open
when the power pushbutton is pushed ON to fill the machine. If the machine is in the cycle, opening
the door will pause the cycle. When the door is closed, the cycle will resume where it left off.

1. Flip the power switch to OFF.

2. Turn off main incoming power.

3. Remove the panel from the area where the switch is located.

4. Remove the panel from the control cabinet side.

5. Remove the switch cover.

6. Remove the two 6-32 grip nuts holding the switch.

7. Replace the switch.

8. Connect the wires to the cabinet as per schematic.

9. Reassemble in reverse order.

10. Restore power.

CAUTION:
Do not overtigthen the safety switch retaining nuts.
Overtightening can damage the switch.