Sony STR-DA7100ES Bedienungsanleitung
133
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\090ADD.fm
STRDA7100ESUC\090ADD.fm
masterpage: Right
STR-DA7100ES
2-320-745-14 (3)
Ad
ditional Inf
ditional Inf
o
rmation
• Sound fields do not function for signals
with a sampling frequency of more than 48
kHz.
kHz.
Dolby Digital or DTS multi channel
sound is not reproduced.
sound is not reproduced.
• Check that the DVD, etc. you are playing
is recorded in Dolby Digital or DTS
format.
format.
• When connecting the DVD player, etc., to
the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.
check the audio setting (the settings for the
audio output) of the connected component.
Recording cannot be carried out.
• Check that the components are connected
correctly.
• Select the source component using INPUT
SELECTOR.
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied)
to connect the receiver to an outdoor FM
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.
Radio stations cannot be tuned in.
• Check that the antennas are connected
securely. Adjust the antennas and connect
an external antenna, if necessary.
an external antenna, if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning). Use direct tuning.
tuning). Use direct tuning.
• Make sure you set the tuning interval
correctly (when tuning in AM stations
with direct tuning).
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the
stations (page 78).
scanning preset stations). Preset the
stations (page 78).
• Press DISPLAY so that the frequency
appears on the display.
RDS does not work.*
• Make sure that you’re tuned to an FM RDS
station.
• Select a stronger FM station.
The RDS information that you want
does not appear.*
does not appear.*
• Contact the radio station and find out
whether or not they actually provide the
service in question. If so, the service may
be temporarily out of order.
service in question. If so, the service may
be temporarily out of order.
There is no picture or an unclear
picture appears on the TV screen or
monitor.
picture appears on the TV screen or
monitor.
• Select the appropriate input on the
receiver.
• Set your TV to the appropriate input mode.
• Move your TV away from the audio
• Move your TV away from the audio
components.
• Assign the component video input
correctly.
• The input signal should be same as input
when you are up-converting an input
signal with this receiver.
signal with this receiver.
The image of the COMPONENT VIDEO
OUT is corrupted.
OUT is corrupted.
• If PROGRESSIVE OUT is set to “ON,”
the image of the signal, which is more than
480i is corrupted when the signals are
output from the COMPONENT VIDEO
OUT jack. Set PROGRESSIVE OUT to
“OFF.”
480i is corrupted when the signals are
output from the COMPONENT VIDEO
OUT jack. Set PROGRESSIVE OUT to
“OFF.”
Receiver
To ground
Ground wire
(not supplied)
(not supplied)
Outdoor FM antenna
continued