Enterasys 6000 Betriebsanweisung
Hardware Overview
1-14
Introduction
LEDs
The 10/100BASE-TX line card uses the following LEDs.
100BASE-FX Line Card
The 100BASE-FX line card provides the same features as the 10/100BASE-TX line card but uses
multimode fiber-optic cable (MMF) to connect to the network.
multimode fiber-optic cable (MMF) to connect to the network.
shows the front panel of the 100BASE-FX line card.
Figure 1-3
Front panel of 100BASE-FX Line Card
Table 1-4
10/100BASE-TX Line Card LEDs
LED
Description
Link
Each port has two LEDs on its connector. The green LED on
the left side of the connector indicates the link status. When
this LED is lit, the port hardware is detecting that a cable is
plugged into the port and the port has established
communication with the device at the other end.
the left side of the connector indicates the link status. When
this LED is lit, the port hardware is detecting that a cable is
plugged into the port and the port has established
communication with the device at the other end.
Activity
The amber LED on the right side of each port connector
flashes each time the port’s transceiver sends or receives
packets.
flashes each time the port’s transceiver sends or receives
packets.
6SSRLC-FX
1
Lnk Act
Lnk Act
Lnk Act
Lnk Act
Lnk Act
Lnk Act
Lnk Act
Lnk Act
2
3
4
5
6
7
8
100BASE-FX port
100BASE-FX