Enterasys csx400 Benutzerhandbuch

Seite von 275
General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide
131
3.
Repeat steps 1 and 2 until the Main Menu screen displays.
4.
Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.
5.
Press ENTER. The CSX400 Local Management Password screen displays and the Local 
Management session ends.
Establishing a TELNET Connection
The CSX400 is shipped with a temporary IP Address of 192.168.254.254 so that your computer 
can communicate with it over your Local Area Network (LAN) through a TELNET connection. 
However, to establish a TELNET connection, your computer must be on the same subnet as the 
CSX400. Cabletron Systems recommends that you assign a temporary IP Address of 
192.168.254.253 to your computer to ensure that both devices are on the same subnet. TELNET 
connections to the host device require the community name passwords assigned at the SNMP 
Community Names screen or if you are doing an initial configuration, use the default password 
public. Refer to the SNMP Community Names section of this manual for additional information 
about community names.
Local Management Screen Hierarchy
Local Management consists of a series of menu screens that provide a path to each of the Local 
Management function screens. Navigate through Local Management by selecting items from the 
menu screen. 
 shows the hierarchy of the Local Management screens.
Figure 55
 
Hierarchy of Local Management Screens
NOTE
See the instructions included with the TELNET application for information about 
establishing a TELNET session.
Main Menu
Password
 Setup Menu
System Level
SNMP Community Names
SNMP Traps
 MIB Navigator
Flash Download
Bridge Setup
Router Setup
WAN Setup
IP
IPX
IP Configuration
IP RIP
IPX Configuration
IPX RIP
IPX SAP