Enterasys csx200 Betriebsanweisung
WAN Configuration Using Local Management
160
CSX200 Family User’s Guide
DDS Physical Configuration
To configure the WPIM-DDS for the CSX203 or CSX200, access the WAN Physical
Configuration screen for the WPIM-DDS, shown in
Configuration screen for the WPIM-DDS, shown in
, by using the arrow keys to
highlight the WAN SETUP menu item on Setup Menu screen (refer to
) and pressing
ENTER. The WAN Physical Configuration screen displays.
Figure 75
WAN Physical Configuration Screen
WAN Physical Configuration Screen Fields
The following sections describe WAN Physical Configuration screen fields and instructions for
setting them. The WAN Physical Configuration screen lets you configure the Physical Interface.
setting them. The WAN Physical Configuration screen lets you configure the Physical Interface.
The WAN Physical Configuration screen displays the following information.
WPIM 1 —
Displays configuration information for as many as four WPIMs.
Type —
Displays the WPIM type.
BRIM # —
Displays the BRIM slot in which the WPIM resides.
SAVE
WAN INT CONFIG
RETURN
Type: DDS
BRIM #: 1
Mode: [Primary]
Active: Yes
Ifaces: 002
BRIM #: 1
Mode: [Primary]
Active: Yes
Ifaces: 002
WAN PHYSICAL CONFIGURATION
DDS Line Mode:
DDS Tx Clock Source:
DDS Loopback:
DDS Tx Clock Source:
DDS Loopback:
WPIM 1 Line Configuration
148202
CSX200 Local Management
Flash Image Version: xx.xx.xx
[WPIM 1]
WPIM 1
[DDS-PRI]
[Loop-Timing]
[NONE]
[Loop-Timing]
[NONE]
DDS In-Speed:
DDS Out-Speed:
DDS Out-Speed:
[56000]
[56000]
[56000]