Enterasys csx200 Betriebsanweisung
CSX200 Family User’s Guide
213
A
WPIM Cable Specifications
WPIM-T1
This section provides the Cabletron Systems part number and connector specifications for
WPIM-T1 interface cables.
WPIM-T1 interface cables.
provides connector type and part number information.
provides RJ48 connector pin assignments.
NOTE
For all WPIM cables, there is part number information for ordering a standard 20-foot
cable or a specified length of cable. The number 20 followed by the part number
denotes the standard 20-foot cable. The letter “L” denotes the specified length required
in feet or meters. For example: 9372095-3 denotes a 3 foot cable; 9372095-3M
denotes a 3-meter cable.
cable or a specified length of cable. The number 20 followed by the part number
denotes the standard 20-foot cable. The letter “L” denotes the specified length required
in feet or meters. For example: 9372095-3 denotes a 3 foot cable; 9372095-3M
denotes a 3-meter cable.
Table 25 T-1 Interface Cable Part Numbers
Connector Type
Part Number
RJ48C
9372094
Table 26 T-1 Connector Pin Assignments
Pin
Signal
1
Receive Ring
2
Receive Tip
3
Not Used
4
Transmit Ring
5
Transmit Tip
6
Not Used
7
Shield Ground
8
Shield Ground