Enterasys csx200 Betriebsanweisung
Installation
CSX200 Family User’s Guide 35
Continue the installation by connecting power as described in
.
Connecting the CSX200 to the Power Source
To connect the CSX200 to the power source, perform the following steps:
1.
Plug the power cord into the back panel of the CSX200.
2.
Plug the other end of the power cord into a grounded wall outlet.
3.
Verify that the PWR LED is on, indicating that the CSX200 is receiving power. After the
CSX200 runs a self test, the CPU LED blinks green indicating normal operation. If the LED
remains red, the processor is faulty; contact Cabletron Systems (refer to
CSX200 runs a self test, the CPU LED blinks green indicating normal operation. If the LED
remains red, the processor is faulty; contact Cabletron Systems (refer to
).
NOTE
The CSX200 has a universal power supply. This allows you to connect the CSX200 to
power sources of 100–125 and 200–240 Vac, 50/60 Hz.
power sources of 100–125 and 200–240 Vac, 50/60 Hz.